seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Valve guides verification > < Removing

Leon Mk2

Fitting
Fitting
  Note!
Progressive insertion of the PTFE seals (characteristics: no retaining spring, larger sealing lip). The sealing lip of these seals cannot be oiled or greased. A radial bearing seal for the axles of the type used previously (retaining spring) may be replaced by a PTFE seal, but not vice versa.
–  Remove the remains of any oil from the camshaft pivot using a clean cloth.
–  Cover the groove in the camshaft cone (for example using cellophane).
   
–  Position the seal in the -T20081B/3- tool, and introduce the ensemble onto the camshaft.
–  Insert the oil seal until the limit using the pressure element of the -T20081B/1- or -T20081- controlled by the bolt.
–  Fit the cogwheel to the camshaft → Chapter.
  E15-0085

Valve guides verification > < Removing