seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel level sender: removing and fitting|Fitting > < Fuel level sender: removing and fitting

Leon Mk2

Removing
Removing
  Note!
To carry out this work it will be necessary to disconnect battery earth strap. The vehicle should be checked for a fitted radio. If necessary, obtain the anti-theft code for the radio first.
–  Note the security and cleanliness measures before beginning any separation and fitting work → Chapter.
Commercial vehicles
–  Separate partially the forward part of the carpet in the load bay.
   
–  Remove the lower panels -1- from the division panel.
–  Remove the rear coverings -2-.
–  Remove the floor protection plates -3- and release the reinforcement beam.
Kombi versions
–  Push the rear right hand side seat forwards.
Continued for all vehicles
–  Remove the cover from the fuel supply unit.
  E20-0068
–  Remove the fuel return tube from the flange -1- (blue) along with the connector -3-.
–  Remove the fuel supply tube -2-.
–  Using the fuel gauge spanner -U-30044-, loosen and separate the cover from the fuel level sender.
–  Pull the fuel level sender upwards.
  E20-0088

Fuel level sender: removing and fitting|Fitting > < Fuel level sender: removing and fitting