–
| Remove engine cover in the -direction of the arrow- . |
–
| Remove ribbed belt, vacuum pump and cylinder head cover upper protector. |
–
| Remove the toothed belt from the camshaft wheel and remove the camshaft wheel. → Chapter, Toothed belt: removing, installing and tensioning |
Note! It is not necessary to remove the damper/belt pulley nor the lower/central protective covers for the toothed belt. |
–
| Loosen camshaft sprocket securing bolt by 1 turn. To loosen the securing bolt, immobilize the camshaft wheel with counter support -T20018A-. |
Note! The adjusting rule -T20038- should never be used as a retaining tool to loosen and secure the camshaft wheel. Use counter support -T20018A-. |
|
|
|