seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Speed regulator (GRA): checking > < Test conditions

Leon Mk2

Work sequence
Work sequence
–  Connect fault reader -V.A.G 1551- (-V.A.G 1552-) and select engine electronics control unit with the “Address code” 01. The ignition must be switched on.
If “G00SG” is indicated, the cruise control system is activated.
–  Press → key.
–  Press keys 1 and 1 for function “Login procedure” and confirm entry with Q key.
–  Enter corresponding code number according to table:
   
Code numberSpeed regulating system
11463Activation of speed regulating system
16167Deactivation of speed regulating system

–  Confirm entry with Q key.
–  Press keys 0 and 6 for the “End output” function and confirm input with the Q key.
After activating the speed regulating system, the functioning of this has to be checked in a test drive.
   

Speed regulator (GRA): checking > < Test conditions