seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Checking for leaks > < Test conditions

Leon Mk2

Check the pressure of the flow
Check the pressure of the flow
  Caution
When checking the injectors, be careful that the fuel flow does not spray over your hands as due to the high pressure the fuel can penetrate the skin causing serious injury.
–  Removing injectors → Chapter
   
–  Connect the injector to the injector tester.
–  Press the lever of the pump slowly downwards. As the injection begins, read the pressure of the flow. If the reading is different from that of the specification, replace the injector.
Specifications (positive pressure): New injectors: 220...230 bar Wear limit: 190 bar
  V02-0184

Checking for leaks > < Test conditions