seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel gauge sender unit: removing and installing|Fitting > < Fuel gauge sender unit: removing and installing

Leon Mk2

Removing
Removing
Observe safety precautions → Chapter.
Observe rules for cleanliness → Chapter.
–  First check whether a coded radio is fitted. If this is the case consult the anti-theft coding.
–  With the ignition switched off disconnect battery earth strap.
   
–  Fold rear seat bench forwards and remove the cover -1-, the dust sleeve -2- may remain in place.
–  Remove the supply hose (black) -5- and return hose (blue) from the quick connector, by pressing the unblocking mechanism.
–  Uncouple the double-contact connector -3- and remove the sender unit flange.
  Caution
The fuel and the pipes may be very hot (danger of burns)
Fuel system is under pressure. Before opening the system, place a cloth around the connection and depressurise, releasing with care.
Use protective glasses and gloves for all fuel system assembly work!
  E20-0127
–  Place spanner -U-40055 A- on nut and unscrew it from the flange.
–  Pull fuel delivery unit and seal out of the opening in fuel tank.
  Note!
If the delivery unit is to be renewed then drain old delivery unit before disposal.
  E20-0003

Fuel gauge sender unit: removing and installing|Fitting > < Fuel gauge sender unit: removing and installing