seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel supply, gas operation > < Coolant pump: Removing and installing|Remove

Leon Mk2

Install
Install
Do the installation in the reverse order, taking in account the following:
   
–  Fit the coolant pump -3- on the engine block and install the mounting bolts -4- along with the rear toothed belt shield.
–  Tighten the mounting bolts -4- to a torque of 20 Nm and the bolt -1- to 10 Nm.
–  Install the return pulley -6- and tighten the mounting bolt -5- to a torque of 50 Nm.
–  Install the toothed belt → Chapter.
–  Install the Poly-V belt → Chapter.
–  Fill with coolant → Chapter.
  N19-0216

Fuel supply, gas operation > < Coolant pump: Removing and installing|Remove