For work on the fuel supply/injection system, carefully follow the “5 rules” of cleaning: |
t
| Carefully clean the connections and the area around them before detaching them. |
t
| Place the removed parts on a clean surface and cover them. Do not use cloths that shed fibres! |
t
| If the repair work is not carried out immediately, the open components should be covered or carefully stored. |
t
| Only install clean components: removing the replacement parts from their wrapping right before carrying out assembly. Do not install components that have been stored without wrapping (e.g. in the toolbox, etc.). |
t
| As the system is open, avoid the use of compressed air when possible. Do not move the vehicle if possible. |
|
|
|