Leon Mk2
Location of the components |
1 - | Fuel pressure regulator |
2 - | Intake manifold pressure sender -G71- with intake air temperature sender -G42- |
3 - | Intake manifold |
4 - | Injector (-N30-…-N33-) |
5 - | Knock sensor 1 -G61- |
q | → Item |
6 - | Throttle valve control unit -J338- |
7 - | Engine revs sender -G28- |
q | Inductive sender |
q | Location: engine block, intake side |
8 - | Earth connection |
9 - | 3-pin connector |
q | For engine revs sender -G28- |
10 - | Control unit 4LV -J537- |
11 - | Ignition transformer -N152- |
q | With identification for ignition wiring, do not swap |
q | → Item |
12 - | 6-pin connector |
q | Black |
q | For lambda probe and lambda probe heating |
13 - | Coolant temperature sender -G62- |
q | With coolant temperature gauge sender -G2- |
14 - | Exhaust recirculation valve -N18- with pot. for exhaust recirculation -G212- |
q | → Chapter |
15 - | Hall sender -G40- |
q | → Item |
16 - | Lambda probe before the catalyst -G39-, 50 Nm lambda probe after the catalyst -G130-, 50 Nm |
q | Location: probe before the catalyst in exhaust manifold, probe after the catalyst, rear part |
17 - | Activated charcoal filter solenoid valve 1 -N80- |
q | In the activated charcoal filter |
q | Activated charcoal filter system → Chapter |