seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Fuel level sender: removing and fitting > < Fuel supply unit: removing and fitting|Remove

Leon Mk2

Fit
Fit
–  Fit the supply unit in the reverse order of removal.
  Note!
t  When fitting the fuel supply unit check that the fuel gauge sender is not bent.
t  Before fitting, wet the flange seal with fuel.
t  Check the fuel hoses for firm seating.
t  Once the fuel tank is fitted, check that the supply, return and deaeration hoses are still attached to the tank.
   
t  Check the fitting position for the fuel supply unit flange: The mark on the flange must coincide with the mark on the fuel tank -arrows-.
–  Carry out operation “How to proceed after an interruption in voltage supply”. → Rep. Gr.24
  E20-0067

Fuel level sender: removing and fitting > < Fuel supply unit: removing and fitting|Remove