Leon Mk2
Fuel tank with accessory parts and fuel filter: removing and installing |
1 - | Plug |
2 - | Tank cover unit |
3 - | Gravity/safety valve |
q | To remove it, free the safety clip and remove the valve from the filler hole, upwards |
q | Check the continuity from the flow valve Perpendicular valve: open Valve inclined 90°: closed |
4 - | O-ring |
q | Renew if deteriorated |
5 - | Earth connection |
6 - | Connection nut, 75 Nm |
q | Remove and install with -U-40055 A- |
7 - | Flexible hose/return hose |
q | Blue or blue mark |
q | From the fuel distributor → Chapter |
8 - | Fuel supply unit |
q | Removing and installing → Chapter |
q | Check the fuel pump → Chapter |
q | Observe the fuel tank fitting position → Fig. |
9 - | Fuel level indication sender |
q | Adjust: → Current flow diagrams, Electrical fault finding and Fitting locations |
10 - | O-ring |
q | Wet with fuel for fitting |
q | Renew in case of fault |
11 - | Fuel filter |
q | Fitting position: the arrow indicates the direction of flow |
12 - | 3 Nm |
13 - | Fuel tank |
q | Removing and installing → Chapter |
14 - | 25 Nm |
15 - | Strip fastener |
q | Observe the different lengths |
16 - | Deaeration tube |
q | To the activated carbon tank → Item |
17 - | Feed hoses |
q | Black |
q | To the fuel distributor → Chapter |
18 - | Spacer bushing |
19 - | 12 Nm |
20 - | Deaeration valve |
q | Test → Fig. |
q | For removal, lightly press the clips inward and withdraw the valve |
|
Note!
|