–
| Measure supply voltage between contacts 2 + 4 of the removed connector using the multimeter and auxiliary cables -V.A.G. 1594- |
–
| Switch on the ignition Theoretical value: 12.4 V at least |
–
| Switch off the ignition. |
–
| Check for a break in the cable between 4 contact connector contact 4 and earth, following the wiring diagram. Cable resistance: 1.5 Ω max. |
–
| Check for a break in the cable between 4 contact connector contact 2 and the fuse holder plate, following the wiring diagram. Cable resistance: 1.5 Ω max. |
|
|
|