–
| Using your hand slide the installation bell -A- in the direction of the arrow until the sender wheel (sealing lip pressure ring next to PTFE seal) -B- rests upon the crankshaft flange-C-. |
Note The guide bolt -D- of the assembly device is inserted through the threaded opening of the crankshaft. In this way, the final fitting position of the sender wheel is established. |
–
| Maintain the installation bell in this position and tighten the two Allen bolts of the assembly device by hand. |
–
| Tighten by hand the hexagonal bolt -E- on the threaded spindle until it comes into contact with the installation bell -A-. |
|
|
|