Leon Mk2
Exhaust gas temperature control: Assembly overview (only on vehicles with manual gearbox) |
1 - | Particle filter |
q | Removing and installing the particulate filter in vehicles with manual gearbox → Chapter |
2 - | Exhaust gas temperature sender 1 -G235-, 45 Nm |
q | Removing and installing → Chapter. |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |
3 - | Turbocharger |
q | Removing and installing → Chapter. |
4 - | Lambda probe -G39- with lambda probe heater -Z19-, 50 Nm |
q | Removing and installing → Chapter. |
5 - | Pressure differential sender -G505-, 45 Nm |
q | Removing and installing → Chapter. |
q | Pressure pipe to particulate filter, 45 Nm |
q | With bolt, tightening torque 4.5 Nm |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |
6 - | Exhaust gas temperature sender 3 -G495-, 45 Nm |
q | Removing and installing → Chapter. |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |
7 - | Exhaust gas temperature sender 4 -G648-, 45 Nm |
q | Removing and installing → Chapter. |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |