seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Intake manifold: removing and installing > < Intake manifold: Assembly overview

Leon Mk2

Removing and installing throttle valve moduleJ338
Removing and installing throttle valve module -J338-
   
Removal:
  A24-10598
–  Remove engine cover panel -arrows-.
–  Release hose clip -arrow- and detach air hose downwards.
  E10-10127
–  Disconnect connector -2-.
–  Remove bolt -1- for dipstick guide tube.
–  Remove bolts -arrows- and detach throttle valve module -J338-.
Installation
Reassembly is carried out in the reverse order; note the following:
l  Tightening torque → Chapter „Intake manifold: Assembly overview“
  A23-10448

Intake manifold: removing and installing > < Intake manifold: Assembly overview