Leon Mk2
Lambda probes: Assembly overview |
1 - | Particle filter |
q | Removing and installing the particulate filter in vehicles with manual gearbox → Chapter |
q | Adaption must be performed after renewing particulate filter. Use → Vehicle diagnostic tester |
2 - | Exhaust gas temperature sender 1 -G235-, 45 Nm |
q | Removing and installing → Chapter. |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |
3 - | Turbocharger |
q | Removing and installing → Chapter. |
4 - | Lambda probe -G39- with lambda probe heater -Z19-, 55 Nm |
q | Removing and installing → Chapter. |
5 - | Differential pressure sender -G505- |
q | Removing and installing → Chapter. |
q | Pressure pipe to particulate filter, 45 Nm |
q | With bolt, tightening torque 4.5 Nm |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |
6 - | Exhaust gas temperature sender 3 -G495-, 45 Nm |
q | Removing and installing → Chapter. |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |
7 - | Exhaust gas temperature sender 4 -G648-, 45 Nm |
q | Removing and installing → Chapter. |
q | Apply hot bolt paste to the thread → Spare parts catalogue. |