seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Safety precautions when working on fuel supply system > < Fuel tank with accessory parts: Removing and installing
Fuel filter: repairing
   
Fuel filter: repairing
1 - Fuel filter:
q   Fill with fuel before fitting
q   The flow direction is marked by arrows
q   Do not interchange the connections
q   Replace if damaged
q   Observe change intervals.
2 - Regulation valve
q   With a temperature below +15 °C: Passage to open filter
q   With a temperature above +30 ℃: Passage to closed filter
3 - Delivery line
q   From fuel tank
q   White or with white marking.
q   Check for secure seating.
4 - Return pipe
q   To fuel tank → Item
q   Blue or with blue marking.
5 - Return pipe
q   Coming from the tandem pump
q   Blue mark
q   Check for secure seating.
6 - Delivery line
q   Going to the tandem pump
7 - Fuel temperature sensor -G81-
8 - Seal
q   Replace
9 - Coming from the tandem pump
10 - Return pipe
q   With the connection sleeve for the fuel temperature sender -G81-
11 - Clip
q   Check for secure seating.
12 - 25 Nm
13 - Spring retainer
14 - Filter housing

   

Safety precautions when working on fuel supply system > < Fuel tank with accessory parts: Removing and installing