SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Removing and installing fuel tank >
< Rules for cleanliness
Leon Mk2
Power unit
4 cylinder Diesel engine (1.9l TDI)
Fuel supply, gas operation / Fuel supply parts: Removing and installing
Removing and installing fuel cooler
Removing and installing fuel cooler
Removing and installing fuel cooler
t
Removing
→ Anchor
t
Installing
→ Anchor
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda
→ Chapter
.
Special tools and workshop equipment required
t
Torque wrench kit -SAT 8010-, see equivalent
→ Anchor
Removing
Observe rules for cleanliness
→ Chapter
.
Note
The fuel radiator is located on the fuel return tube to the fuel tank. It is fitted low down in the vehicle.
–
Separate the under body covering.
–
Remove the cover
-A-
(if one is fitted).
–
Disconnect the fuel tubes on the fuel radiator.
–
Remove nuts
-arrows-
.
Installing
Install in reverse order to dismantling, noting the following:
–
Tighten the radiator bolts to a torque of 15 Nm.
Power unit
4 cylinder Diesel engine (1.9l TDI)
Fuel supply, gas operation / Fuel supply parts: Removing and installing
Removing and installing fuel cooler
Removing and installing fuel tank >
< Rules for cleanliness