SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Coolant pipe - left: Removing and installing >
< Coolant pipe - front: Removing and installing
Leon Mk2
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Engine cooling
Cooling system: repairs
Coolant pipe (top front): Removing and installing
Coolant pipe (top front): Removing and installing
Coolant pipe (top front): Removing and installing
t
Removing
→ Anchor
.
t
Fitting
→ Anchor
.
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda
→ Chapter
.
Special tools and workshop equipment required
t
Hose clamp pliers -VAS 6340-, see equivalent
→ Anchor
t
Base -VAS 6499-, see equivalent
→ Anchor
Removing
.
–
Remove the engine cover upwards
-arrows-
.
–
Remove air filter housing
→ Chapter
.
–
Drain coolant
→ Chapter
.
–
Remove bolt
-2-
.
–
Release hose clips
-1-
and
-3-
, and pull coolant hoses off.
–
Remove upper front coolant pipe.
Fitting
.
l
Tightening torques
→ Chapter
Installation is carried out in reverse order, noting the following:
–
Fill up coolant
→ Chapter
.
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Engine cooling
Cooling system: repairs
Coolant pipe (top front): Removing and installing
Coolant pipe - left: Removing and installing >
< Coolant pipe - front: Removing and installing