SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Checking valves >
< Reworking valve seats
Leon Mk2
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Engine cylinder head, valve gear
Valve gear / lves/">Valves
Checking valve guides
Checking valve guides
Checking valve guides
Special tools and workshop equipment required
t
Universal dial gauge bracket -VW 387-
t
Dial gauge -VAS 6079-
Procedure
Note
t
If the valve is renewed as part of a repair, use a new valve for the measurement.
t
Due to differing stem diameters, only use intake valve in intake guide and exhaust valve in exhaust guide.
–
Attach dial gauge -VAS 6079- with universal dial gauge holder -VW 387- to cylinder head.
–
Insert valve into valve guide.
l
The end of the valve stem must be flush with the guide.
–
Determine rock.
l
Wear limit: 1.0 mm.
–
If the wear limit is exceeded, repeat the measurement with new valves.
–
Renew cylinder head if wear limit is still exceeded.
Note
Valve guides cannot be exchanged.
Power unit
4 cylinder Diesel engine (2.0 litre engine, Common Rail, Generation II)
Engine cylinder head, valve gear
Valve gear / lves/">Valves
Checking valve guides
Checking valves >
< Reworking valve seats