seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine cooling > < Oil pressure switchF1: check

Leon Mk2

Oil pressure: Check
Oil pressure: Check
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Oil pressure tester -V.A.G 1342-, see equivalent → Anchor
Operation process
l  Oil level okay
l  Engine oil temperature: approx 80 °C.
–  Remove oil pressure switch -F1- → Chapter.
–  Connect oil pressure tester -V.A.G 1342- to hole for oil pressure switch -F1-.
–  Screw an old oil pressure switch into hole on oil pressure tester -V.A.G 1342- to seal hole.
–  Start engine.
l  Oil pressure at engine idle: min. 0.8 bar.
l  Minimum oil pressure at 2000 rpm at least minimum 2.0 bar
  W00-0516

Engine cooling > < Oil pressure switchF1: check