seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing balancer shaft module > < Removing and installing oil sump

Leon Mk2

Removing and installing oil pump
Removing and installing oil pump
Special tools and workshop equipment required
t  Circlip pliers (commercially available)
t  M3 bolt
   
Removing
–  Remove sump → Chapter.
–  Unscrew bolts -arrows- and pull suction line off oil pump.
  A17-10563
–  Remove circlip -1- with circlip pliers.
–  Pull drive shaft -2- out of oil pump using a magnet -arrow-.
–  Unscrew bolts -3, 4, 5- and remove oil pump.
  Caution
Bolt on intermediate gear wheel must not be loosened.
Installing
l  Specified torque → Chapter „Assembly overview - oil pump, sump, balancer shaft module“.
Installation is carried out in the reverse order; note the following:
  Note
t  Renew O-ring.
t  Renew damaged or overstretched circlip.
t  Circlip must lie in base of groove.
  A17-10564
–  Insert dowel sleeves if oil pump has no dowel sleeves -arrows-.
–  Insert dowel sleeves if balancer shaft module has no dowel sleeves for centring oil pump.
–  Install sump → Chapter.
  A17-10565

Removing balancer shaft module > < Removing and installing oil sump