seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Front exhaust pipe with particulate filter: Assembly overview > < Engine control unit with antitheft protection: Removing and installing

Leon Mk2

Front exhaust pipe with particulate filter
Front exhaust pipe with particulate filter
  Note
t  The connection element on the primary exhaust tube should not be bent more that 10 º, otherwise it may be damaged.
t  After completing work on the exhaust system ensure that it is tension-free and remains at a sufficient distance from the bodywork. If necessary, loosen the clamp and align the silencer and the exhaust pipe so that there is always a sufficient distance from the bodywork and is evenly distributed over the suspension elements.
t  Replace self-locking nuts.
t  → Chapter „Front exhaust pipe with particulate filter: Assembly overview“
t  → Chapter „Particle filter for front wheel drive vehicles: Removing and installing“
t  → Chapter „Particle filter for four-wheel drive vehicles: Removing and installing“
   

Front exhaust pipe with particulate filter: Assembly overview > < Engine control unit with antitheft protection: Removing and installing