Leon Mk2
Assembly overview - tank for reduction agent |
1 - | Wiring harness |
2 - | 5 Nm |
3 - | Pump for reduction agent -V437- |
q | With heater for reduction agent pump -Z103-. |
q | With pressure sender for reduction agent metering system -G686-. |
q | With reversal valve for reduction agent -N473-. |
4 - | Seal |
q | Renew |
5 - | Gasket |
q | Renew |
6 - | Locking ring, 80 Nm |
q | Remove and install using wrench -T50014-. |
7 - | Breather connection |
8 - | Heater element (heater cup) |
q | With heater for reduction agent tank -Z102-. |
q | With sender for reduction agent tank -G697- |
q | With temperature sender for reduction agent -G685-. |
9 - | Gasket |
q | Renew if damaged. |
10 - | Filter |
11 - | Evaluation unit for reduction agent tank -G698- |
12 - | 25 Nm |
13 - | Control unit for reduction agent heater -J891- |
14 - | Tank for reduction agent |
q | Removing and installing → Chapter. |
15 - | Seal |
q | Renew if damaged. |
16 - | Cap |
q | For filling. |
q | Accessible from luggage compartment. |
17 - | Delivery line |
q | For reduction agent. |
q | With heater for reduction agent line -Z104-. |
18 - | Injector for reduction agent -N474- |
q | Removing and installing → Chapter. |