Leon Mk2
Air filter: Assembly overview |
1 - | Hose connection |
2 - | Air intake hose |
q | To turbocharger |
q | Check for dirt and accumulated leaves, etc. |
3 - | 1.5 Nm |
q | 2 units |
4 - | Air mass meter -G70- |
q | Removing and installing → Chapter |
5 - | O ring |
q | Renewing |
q | Install with silicone-free lubricant |
6 - | 1.5 Nm |
q | For the air filter upper part |
7 - | 8 Nm |
q | For the air filter bottom part |
8 - | Coupling |
9 - | Packing plate |
10 - | Top part of air cleaner |
q | Clean out dirt, leaves and salt deposits |
11 - | Air filter element |
q | Always use a genuine spare part air filter element |
q | Heed replacement intervals → Booklet101 |
12 - | Air filter lower part |
q | Clean out dirt, leaves and salt deposits |
q | For countries with cold climate, the bottom part of the air filer is provided with a hose for the hot air intake. |
q | Country version: With snow screen |
13 - | Connection for water drain hose |
q | Cleaning |
14 - | Water drain hose |
q | Cleaning |
15 - | Flutter valve |
q | Clean and re-install |
16 - | Intake channel |
q | Leads to the lock carrier |
q | Clean out dirt, leaves and salt deposits |
17 - | Spring type clip |
18 - | Coupling hose |
q | To turbocharger |