seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Emptying fuel tank > < Removing and installing fuel delivery unit

Leon Mk2

Removing and installing fuel gauge senderG
Removing and installing fuel gauge sender -G-
Removing:
–  Remove fuel delivery unit → Chapter.
   
–  Press together securing tabs -arrows- and pull off fuel gauge sender upwards.
–  Note colour co-ordination of cables for reinstallation.
  N20-10800
–  Release and detach electrical connectors -13-. Then lift the securing hooks of the electrical connector.
Installing:
  A20-10431
–  Attach connectors -13-. Note the colour identification.
–  Check connectors are secured properly by pulling.
–  Insert fuel gauge sender -G- into guide on fuel delivery unit and press down until it engages.
–  Install fuel delivery unit → Chapter.
  A20-10431

Emptying fuel tank > < Removing and installing fuel delivery unit