seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Engine: fitting > < Engine from manual gearbox: separating and assembling

Leon Mk2

Attaching engine to repair stand
   
Attaching engine to repair stand
Special tools and workshop equipment required
t  Engine and gearbox support -VW 540-, see equivalent → Anchor
t  Lifting tackle -2024 A-, see equivalent → Anchor
t  Engine and gearbox support -VAS 6095-, see equivalent → Anchor
t  Workshop crane -VAS 6100-, see equivalent → Anchor

Operation process
Proceed as follows:
l  With the gearbox separated from the engine → Chapter.
–  Remove flywheel → Chapter.
   
–  To transport engine, engage lifting tackle -2024 A- on engine and workshop hoist -VAS 6100-.
  Note
To adjust to the centre of gravity of the assembly, the perforated rails of the support hooks must be positioned as shown.
  WARNING
Accidents can be caused if parts of the support bracket are not correctly secured.
The support hooks and retaining pins on the support bracket must be secured with locking pins -arrows-.
  A10-10911
–  Secure engine with engine and gearbox support -VW 540- to engine and gearbox support -VAS 6095--arrows-.
  A10-10037

Engine: fitting > < Engine from manual gearbox: separating and assembling