| –
| Push the installation socket -C- by hand in the direction of the arrow until the sealing lip pressure ring -B- sits on the crankshaft flange -A-. |
| –
| Insert the guide pin for petrol engines (red handle) -F- into the crankshaft hole. In this way, the final fitting position of the sender wheel is established. |
Note | Do not insert the guide pin for petrol engines (red handle) -F- into the crankshaft hole. |
| –
| Tighten the Allen bolts of the fitting device by hand. |
| –
| Screw hexagon nut -E- onto threaded spindle by hand until it lies on assembly housing -C-. |
|
|
|
