seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
A - Fit the seal along with the sender wheel on the fitting deviceT10134 > < To remove the sealing flange with the sender wheel from the crankshaft

Leon Mk2

To fit the sealing flange with the sender wheel to the crankshaft
To fit the sealing flange with the sender wheel to the crankshaft
  Note
t  The sealing flange with the PTFE seal is fitted with a pressure ring on the sealing lip. This pressure ring fulfils the function of an assembly sleeve and cannot be removed before fitting.
t  Once unwrapped, do not remove the sealing flange from the sender wheel or twist them.
t  The sender wheel is held in its installation position on the assembly device -T10134- by a locating pin.
t  Sealing flange and oil seal form one unit and must only be renewed together with the sender wheel.
t  The assembly tool -T10134- is held in its installation position for the crankshaft by a guide pin which is inserted into a hole on the crankshaft.
   
Installation tool -T10134-
A -  Attachment surface
B -  Conical hexagon bolt
C -  Installation bell
D -  Locating pin
E -  Hexagon socket head bolt
F -  Guide pin for diesel engines (black handle)
G -  Guide pin for petrol engines (red handle)
  N13-10023

A - Fit the seal along with the sender wheel on the fitting deviceT10134 > < To remove the sealing flange with the sender wheel from the crankshaft