seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
To fit the sealing flange with the sender wheel to the crankshaft > < Removing and installing flywheel

Leon Mk2

To remove the sealing flange with the sender wheel from the crankshaft
To remove the sealing flange with the sender wheel from the crankshaft
  Note
t  For clarity, the process is described with the engine removed.
t  The sequence of operations is identical with the engine mounted and the gearbox removed.
Operation process
–  Remove the gearbox → Gearbox removal and fitting; Rep. gr.34.
–  Remove the pressure plate and the clutch disc → Clutch: removing and installing; Rep. gr.30.
–  Turn the crankshaft in the direction of engine rotation to TDC cylinder 1 → Chapter.
–  Remove the flywheel → Chapter
–  Remove sump → Chapter.
–  Remove the engine speed sender -G28- → Chapter.
–  Unscrew the attachment bolts from the sealing flange.
  Note
The sealing flange and the sender wheel are removed together from the crankshaft by the three M6 x 35 mm bolts.
   
–  Screw three bolts M6 x 35 mm into the threaded spaces of the sealing flange -arrows-.
–  Alternatively (max.1/2 turn (180°) per bolt), bolts on the sealing flange and remove flange from the crankshaft with the sender wheel.
  N13-10082

To fit the sealing flange with the sender wheel to the crankshaft > < Removing and installing flywheel