| VW / AUDI tool | SEAT tool |
| Support bracket -10-222A- | Support -U 30025E- See image of the tool or equipment → Chapter |
| Coupling tool -2024 A- | |
| Extension -2024 A/1- | |
| Counterhold tool -3067- | |
| Spanner -3122 B- | Spanner -T20175- See image of the tool or equipment → Chapter |
| Compressor tool for valve spring -3362- | Push rod -T20034D- See image of the tool or equipment → Chapter |
| Valve stem seal puller -3364- | Extractor -T20058A- See image of tool or equipment → Chapter |
| Tool for inserting seals onto the valve stems -3365- | Plunger -T20039-. See image of the tool or equipment → Chapter |
| Counterhold tool -3415- | Retention tool -T20018B- see image for tool or unit → Chapter |
| Hose clamps -3094- | Push rod -U 30042- See image of the tool or equipment → Chapter |
| Extractor -KUKKO 21/2- | Extractor kit -T20140- See image of the tool or equipment → Chapter |
| Measuring tool -T10007- | |
| Support -T10014- | |
| attachment tool -T10038- | |
| Extractor -T10055- | Extractor -T10055A- See image of tool or equipment → Chapter |
| Spanner -T10058- | Spanner -T20203- See image of the tool or equipment → Chapter |
| Counterhold tool -T10060A- | |
| Tappet -T10117- | |
| Assembly tool -T10240- | |
| Centring pin -T10093- | |
| Extractor -T10094 A- | |
| Extractor -T10118- | |
| Installation tool -T10134- | |
| Dial gauge adapter -T10170- | Measuring tool -A 65088-. See image of the tool or equipment → Chapter |
| Camshaft fastener -T10171 A- | |
| Counterhold tool -T10172- | Retention tool -T20018B- see image for tool or unit → Chapter |
| Rotation tool -T10202- | |
| Assembly tool -T10238- | |
| Securing bolt -T10340- | |
| Support -T10358- | |
| Tool set, 17mm -T10395- | |
| Locking pin -T40011- | |
| Coupling tool -T40013 - | Support tool -T20186- see image of the tool or equipment |
| attachment tool -T40075- | |
| Adapter -VAG 1274/8- | |
| Adapter -VAG 1274/9- | |
| Pressure tester -V.A.G 1318- | |
| Torque wrench (5…50 Nm) -V.A.G 1331- | Torque wrench socket set -SAT 8010- See image of the tool or equipment → Chapter |
| Torque wrench (40 - 200 Nm) -V.A.G 1332- | Torque wrench socket set -SAT 8010- See image of the tool or equipment → Chapter |
| Oil pressure tester -V.A.G 1342- | |
| Quantity comparison meter -V.A.G 1348- | |
| Engine and gearbox jack -V.A.G 1383 A- | Engine and gearbox jack -SAT 1040- See image of tool or unit → Chapter |
| Turbocharger tester -V.A.G 1397A- | |
| Plate work saw -V.A.G 1523A- | Pneumatic saw -SAT 5180A-. See image of the tool or equipment → Chapter |
| Pressure tester -V.A.G 1527B- | |
| Coolant pump wrench -V.A.G 1590- | Counterhold tool -T20159- |
| Auxiliary cable kit -V.A.G 1594C- | |
| Adaptor cable -V.A.G 1598- | |
| Torque wrench -V.A.G 1601- | Torque wrench socket set -SAT 8010- See image of the tool or equipment → Chapter |
| Digital multimeter -V.A.G 1715- | |
| Compression meter -V.A.G 1763- | |
| Torque wrench -V.A.G 1783- | |
| Wiring harness repair set -VAS 1978A- | |
| Fuel drainage equipment -VAS 5190- | |
| Test instrument adapter/DSO (5-pin) -VAS 5565- | |
| Dial gauge -VAS 6079- | |
| Engine and gearbox support -VAS 6095- | |
| Coolant charger -VAS 6096- | |
| Workshop crane -VAS 6100- | |
| Manual vacuum pump -VAS 6213- | Pressure / underpressure pump -SAT 1390- see image for tool or unit → Chapter |
| Chain pipe cutter -VAS 6254- | Pliers -U 40075- See image of the tool or equipment → Chapter |
| Dial gauge kit, 4 parts -VAS 6341- | |
| Pressure limiting valve -VAS 6342- | |
| Tappet -VW 207 C- | Plunger -T20061-. See image of the tool or equipment → Chapter |
| Universal dial gauge bracket -VW 387- | Support -T20020- See image of the tool or equipment → Chapter |
| Pressure hose -VW 653/3- | Measuring tool -T20033-. See image of the tool or equipment → Chapter |
| Engine and gearbox support -VW 540- | |
