–
| Pull off spring clip -1- together with intake hose from turbocharger. |
–
| Pull off vacuum hose -2- at air cleaner housing. |
–
| Unscrew the fixing bolts -3- and remove the air filter housing upwards from the bearing bolts. |
Note t
| Hose connections and hoses for charge air system must be free from oil and grease before fitting. Do not use any lubricants containing silicone when assembling. |
t
| Check for salt residue, dirt and leaves in air intake hose (engine intake side). |
t
| Check for dirt in air intake hose from air duct. |
Perform remaining installation in reverse order of removal. |
|
|
|