Leon Mk2
| Coolant regulator housing: Assembly overview |
| 1 - | O ring |
| q | replace |
| 2 - | Thermostat housing |
| q | Removing and installing → Chapter |
| 3 - | O ring |
| q | replace |
| 4 - | Lower coolant pipe |
| q | Removing and installing → Chapter |
| 5 - | 10 Nm |
| 6 - | 15 Nm |
| 7 - | O ring |
| q | replace |
| 8 - | Heating element connection |
| q | 14 … 16 Ω at 25 °C |
| q | Cannot be renewed as a separate unit |
| 9 - | Connector |
| 10 - | With Cooling system thermostat managed on the basis of a map of characteristics -F265- |
| q | With connection nozzle |
| q | Removing and installing → Chapter |
| q | check → Chapter |
| q | Starts to open: at approx. 105 °C |
| q | Opening travel: min. 7 mm |
