SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Oil filter and oil cooler - exploded view >
< Removing and installing oil sump
Leon Mk2
Power unit
4 cylinder engine (1.8l 5V Turbo)
Engine lubrication / Removing and installing parts of lubrication system
Removing and installing oil pump
Removing and installing oil pump
Removing and installing oil pump
t
Removing
→ Anchor
.
t
Installing
→ Anchor
.
Removing
–
Remove oil sump and baffle plate
→ Chapter
.
–
Remove bolt
-2-
.
–
Take chain sprocket off oil pump shaft.
–
Unscrew the bolts
-1-
and
-3-
and remove the oil pump.
Installing
Reassembly is carried out in the reverse order; note the following:
–
Set the guide pins
→ Item
on the upper part of the oil pump.
l
Installation position of oil pump shaft/sprocket: Attachment only possible on one position.
–
Fit the oil sump
→ Chapter
.
Tightening torques
Component
Nm
Chain sprocket to oil pump shaft
22
Oil pump to cylinder block
16
Power unit
4 cylinder engine (1.8l 5V Turbo)
Engine lubrication / Removing and installing parts of lubrication system
Removing and installing oil pump
Oil filter and oil cooler - exploded view >
< Removing and installing oil sump