SEAT Workshop Service and Repair Manuals > Leon Mk2 > Power unit | 4 cylinder engine (1.8l 5V Turbo) | Fuel supply, gas operation | Electronic regulation of engine output, electronic accelerator | Accelerator pedal module with accelerator position sender: Removing and installing

Accelerator pedal module with accelerator position sender: Removing and installing

t	Removing → Anchor.

t	Installing → Anchor.

Removing

–	Remove the storage on driver's side → Bodywork - Assembly work interior; Rep. gr.68.

–	Pull out the plug -2-.

–	Unscrew bolts -1- and -3-.

–	Remove the accelerator pedal module.

Installing

Reassembly is carried out in the reverse order; note the following:

–	Install the storage on driver's side → Bodywork - Assembly work interior; Rep. gr.68.

Tightening torque

Component	Nm
Accelerator pedal module to pedal bracket	10

SEAT Workshop Service and Repair Manuals