–
| Unplug electrical connector -3- on active carbon filter system solenoid valve 1 -N80-. |
–
| Disconnect the electric plug connection -5- on the air mass meter -G70-, unclip the lines of the air filter housing and lay to one side. |
–
| Detach hoses -1-, -4-, -6- and -7-. |
–
| Loosen expansion clip -2- and separate air cleaner housing. |
–
| Pull upward to loosen lower mounts and to remove air cleaner housing. |
Installation is carried out in reverse sequence. |
|
|
|