Leon Mk2
Fuel tank with attached components - exploded view |
1 - | Bolt. |
q | Tightening torque → Rep. gr.26 |
2 - | Mounting for exhaust system |
3 - | tension belt |
q | Different lengths |
4 - | Fuel line |
q | From fuel filter to engine |
q | Do not kink |
q | Partly covered by the fuel tank |
q | Press release tab on pipe connector to disconnect |
5 - | Fuel line |
q | only vehicles with auxiliary heater: To metering pump for auxiliary heater |
q | Do not kink |
q | Partly covered by the fuel tank |
q | Press release tab on pipe connector to disconnect |
6 - | Overflow hose |
q | hung onto the bracket for the bumper |
7 - | Rubber cup |
8 - | Sealing plug |
q | Screw down until it clicks audibly |
q | Secured to tank flap unit |
9 - | Bolt. |
q | To secure fuel filler neck |
q | To eliminate electrostatic charge → Fig. |
q | 20 Nm |
10 - | Fuel tank |
q | Removing and installing → Chapter |
11 - | Heat shield for fuel tank |
12 - | Nut |
q | 2 Nm |
13 - | Breather line |
q | To activated charcoal filter. |
q | Do not kink |
q | Partly covered by the fuel tank |
q | Press release tab on pipe connector to disconnect |
14 - | Heat shield for fuel tank |
15 - | tension belt |
q | Different lengths |
16 - | Nut |
q | 2 Nm |
17 - | Bolt. |
q | 20 Nm |
18 - | Nut |
q | 2 Nm |
19 - | Spreader clip |
|