t
| Longer wrench -T10347-, see equivalent → Anchor |
t
| Pliers for spring-loaded band-type clamps -VAS 6499-, see equivalent → Anchor |
Note t
| In order to reach the injectors, you must first remove the intake manifold and the fuel rail. |
t
| The combustion chamber (Teflon) ring seal and the O-ring must always be renewed. |
WARNING The fuel system is pressurised. The fuel pressure in the high-pressure part of the injection system must be reduced to a residual pressure prior to opening; for procedure see → Chapter. |
|
Caution Risk of severe damage to the electronic components when disconnecting the battery. |
Observe the correct procedure for disconnecting the battery → Rep. gr.27. |
|
|
|
|