seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removing and installing air mass meterG70 > < Removing and installing air filter element

Leon Mk2

Removing and installing air filter housing
Removing and installing air filter housing
t  Removing → Anchor
t  Install → Anchor.
   
Removing
–  Unscrew both bolts-arrows- for the air pipes -1- on the lock carrier plate.
–  Remove the air conduit -1- from the air filter housing.
  E24-10062
–  Separate intake hose 1 -G70- from -air mass gauge-.
–  Disconnect the connector -2- from the air mass meter -G70-.
–  Unclip cable harness from air cleaner housing and lay down to side.
–  Loosen expansion clip -3- and separate air cleaner housing.
–  Pull upward to loosen lower mounts and to remove air cleaner housing.
Installing
Installation is carried out in reverse sequence.
  A10-10325

Removing and installing air mass meterG70 > < Removing and installing air filter element