seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Crash fuel shut-off > < Fuel tank: Removing and installing

Leon Mk2

Fuel filter: Replace.
Fuel filter: Replace.
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter
Special tools and workshop equipment required
   
t  Collecting tray -VAS 6208-, see equivalent → Anchor
  Note
t  Observe the safety precautions before starting work → Chapter .
t  Observe rules for cleanliness → Chapter.
Removal:
–  Place drip tray under fuel filter.
  WARNING
Fuel supply pipes are pressurised. Wear safety goggles and appropriate clothing to avoid injury and contact with skin. Before loosening hose connections, wrap a cloth around the connection. Then eliminate the pressure by carefully separating the pipe.
  W00-10228
–  Pull fuel lines -1-, -2- and -3- off. To do this press release tab.
–  Unscrew the bolt -4-.
–  Take fuel filter off.
Fitting .
Fit in reverse order from removal, remembering the following:
  A20-1082
installation position
The filter casing pin -2- must fit into the notch -1- of the filter bracket.
Flow direction is marked on filter housing with arrows.
The tightening torque for the securing clip is 3 Nm.
–  Purge the fuel system → Chapter.
  Note
After replacing (fitting) the fuel filter, the fuel supply system should be bled → Chapter.
  A20-1133

Crash fuel shut-off > < Fuel tank: Removing and installing