To prevent injuries to persons and/or serious damage to the fuel injection and ignition system, the following must be noted: |
t
| Do not touch or remove the ignition cables with the engine running or idling. |
t
| The ignition must be switched off before connecting or disconnecting injection or ignition system wiring or tester cables. |
If in the test drives it is necessary to use the tester units, take note of the following: |
t
| Testers and measuring instruments must always be secured to the rear seat and operated by a 2nd person from this location. |
If test equipment is operated from the front passenger's seat, the occupant could suffer injury in the event of an accident if the front passenger's airbag is triggered. |
If the engine is to be turned at starter speed without starting: |
If the fault memory has been erased, you must generate the readiness code again. |
|
|
|