Leon Mk2
| Intake manifold - Assembly overview |
| 1 - | Intake manifold |
| 2 - | Seal |
| q | Replace. |
| 3 - | 7 Nm |
| 4 - | Throttle valve control mechanism -J338- |
| q | Clean → Chapter |
| q | When replacing, erase adaptive values and adapt the engine control unit to the throttle control unit → Vehicle diagnosis, testing and information system VAS 5051“Guided function” |
| 5 - | 20 Nm |
| 6 - | Flexible hose |
| q | To the brake servo |
| 7 - | O-ring |
| q | Replace. |
| 8 - | Coolant hose |
| q | For engine block ventilation pre-heater |
| 9 - | Hose clip (spring-type clip) |
| q | Removing and installing with the pliers -VAS 6340- |
| 10 - | For engine block ventilation heater |
| q | To remove and install, remove the intake manifold |
| 11 - | 3 Nm |
| 12 - | Flexible hose |
| q | Goes to the engine block ventilation vacuum valve |
| 13 - | Intake manifold pressure sender -G71- with air intake temperature sender -G42- |
| q | Secured to the intake manifold using a clip |
