SEAT Workshop Service and Repair Manuals

Aggregates Carrier: Tightening Torques t  Aggregates carrier, motor side → Fig. t  Aggregates carrier, motor side → Fig. t  Pendulum support → Fig.

Aggregates carrier, motor side

-A-1)	30 Nm + 90° (1/4 turn)
-B-1)	30 Nm + 90° (1/4 turn)
-C-1)	30 Nm + 90° (1/4 turn)
1) Replace the bolts

Engine assembly brackets, gearbox side

-1-1)	30 Nm + 90° (1/4 turn)
-2-1)	30 Nm + 90° (1/4 turn)
1) Replace the bolts

Pendulum support   Note Fit the pendulum support first to the gearbox and then to the assembly mounting bridge.

-A- Resistance category 8.8 = 1)	30 Nm + 90° (1/4 turn)
-A- Resistance category 10.9 = 2)	30 Nm + 90° (1/4 turn)
-B-1)	100 Nm+ 90° (1/4 turn.)

1) Replace the bolts

2) For versions with the gearbox bolts of strength class 10.9 only when double-threaded sockets are installed (e.g. HeliCoil). ID: bead threaded on the first rotation -Arrow-.