Leon Mk2
Diagram of coolant hose connections |
1 - | Radiator |
q | Removing and fitting → Chapter |
q | Renew coolant after replacing cylinder head gasket |
2 - | Coolant pump -V50- |
3 - | Turbocharger return hose |
4 - | Coolant distribution housing |
q | Removing and installing → Chapter |
q | With thermostat |
5 - | Coolant pump |
q | Installing and removing: |
6 - | Cylinder head/cylinder block |
q | Renew coolant after replacing cylinder head gasket |
7 - | Turbocharger |
q | Removing and fitting → Chapter |
8 - | Expansion tank |
q | With seal plug |
q | Testing pressure relief valve in filler cap → Item |
9 - | Heating heat exchanger |
q | Renew coolant after replacing cylinder head gasket |
10 - | Flexible tube |
q | Only vehicles with automatic transmissions |
11 - | Gearbox oil cooler |
q | Only autom. Gearbox |
12 - | Thermostat at bypass |
q | Only vehicles with automatic transmissions |
q | check → Chapter |
13 - | Water hose |
14 - | Engine oil radiator |
15 - | Intake manifold |
q | Removing and fitting → Chapter |