seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Removal: > < Removing and installing cylinder head

Leon Mk2

removing and fitting; vehicles without separated notched belt guard
removing and fitting; vehicles without separated notched belt guard
  Note
t  Vehicles without a split guard for the timing belt with inspection cover → Anchor
t  Vehicles with split guard for the timing belt → Anchor
Removing → Chapter.
Installing → Chapter.
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
   
t  Socket -U-30025E-, see equivalent → Anchor
  W00-2961
t  Support -T10339-
t  Torque wrench -V.A.G 1332-, see equivalence → Anchor
  Note
In order to disassemble the engine support, it must be raised considerably with the support -U-30025E-. To avoid damage to the driveshafts due to the sharp angle, they must be loosened from their fittings to the gearbox.
  W00-10413

Removal: > < Removing and installing cylinder head