seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Oil filter housing:emptying > < Part II:
Part III:
Part III:
Oil filter mount, vehicles with engine code BWJ → Anchor
Oil filter mount, vehicles with engine code BWA
   
1 - Pipe
q   For engine block ventilation
2 - Oil pressure switch -F1-
q   1.4 bar, black
q   check → Chapter
q   Tightening torque: 20 Nm.
3 - 15 Nm
q   With earth cable for oil pressure switch
4 - Support
5 - 25 Nm
6 - Oil cooler
q   Note the identification → Chapter
q   Ensure clearance to adjacent components
q   Coolant hose schematic diagram → Chapter
q   Removing and installing → Chapter
7 - Shutter
q   Replace.
8 - 15 Nm
9 - Oil seal
q   Replace.
q   Oil lightly
q   installation position → Fig.
10 - Dustcap
11 - Oil filter housing, 25 Nm
q   Remove and install with the oil filter spanner -3417-, see equivalent → Anchor
q   Empty → Chapter
12 - Oil filter cartridge
q   Before removing, drain the oil filter housing → Chapter
13 - Anti-surge valve
14 - Shutter
q   Replace.
15 - Oil filter bracket
q   With pressure relief valve, approx. 4 bar
q   Removing and fitting → Chapter
16 - Spring type clip

Oil filter mount, vehicles with engine code BWJ
   
1 - Pipe
q   For engine block ventilation preheater
2 - Oil pressure switch -F1-
q   1.4 bar, black
q   check → Chapter
q   Tightening torque: 21 Nm.
3 - 15 Nm
q   With earth cable for oil pressure switch
4 - Support
5 - Bolt
q   15 Nm
6 - Oil cooler
q   Note the identification → Chapter
q   Ensure clearance to adjacent components
q   Coolant hose schematic diagram → Chapter
q   Removing and installing → Chapter
7 - Shutter
q   Replace.
8 - Oil filter housing, 25 Nm
q   Remove and install with the oil filter spanner -3417-, see equivalent → Anchor
q   Empty → Chapter
9 - Dustcap
10 - Oil seal
q   Replace.
q   Oil lightly
q   installation position → Fig.
11 - Oil filter cartridge
q   Before removing, drain the oil filter housing → Chapter
12 - 15 Nm
13 - Anti-surge valve
q   installation position → Fig.
14 - Shutter
q   Replace.
15 - Oil filter bracket
q   With pressure relief valve, approx. 4 bar
q   Removing and installing → Chapter

   
Mounting position for the anti-surge valve
  A17-10267
Fitting the gasket ring
  A17-10277

Oil filter housing:emptying > < Part II: