seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Operation and voltage supply: verification > < Fuel level gauge sender G : removing and fitting
Checking fuel pump
Checking fuel pump
Operation and voltage supply: verification → Chapter
Check the fuel pressure → Chapter.
Checking holding pressure → Chapter
Checking delivery rate → Chapter
Checking current draw → Chapter
   
Consult the equivalence table for tools and equipment according to applicability among Seat / VW / Audi / Skoda → Chapter.
Special tools and workshop equipment required
t  Wrench -T10202-
t  Pressure tester -V.A.G 1318-
t  Adapters -V.A.G 1318/1-
t  Adapters -V.A.G 1318/11-
t  Hose adaptor -V.A.G 1318/16-
t  Adapters -V.A.G 1318/17A-

   
t  Connector -V.A.G 1318/23-
t  Torque wrench (40 - 200 Nm) -V.A.G 1332-
t  V.A.G 1348 remote control -V.A.G 1348/3A-
t  Auxiliary cable kit -V.A.G 1594C-
t  Digital multimeter -V.A.G 1715-
t  Adapter for type of measurement / DSO (5 poles) -VAS 5565-
t  Measuring container
t  Pressure tester -V.A.G 1527B-

  W00-0513

Operation and voltage supply: verification > < Fuel level gauge sender G : removing and fitting