SEAT Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Checking fuel pump >
< Removing and installing fuel delivery unit
Leon Mk2
Power unit
4 cylinder Gasoline direct injection engine, 2.0 liter turbo 4V, mechanics
Fuel supply, gas operation
Repairing the fuel supply system
Fuel level gauge sender G : removing and fitting
Fuel level gauge senderG: removing and fitting
Fuel level gauge sender -G-: removing and fitting
Removing
→ Anchor
.
Installing
→ Anchor
.
Note
Gradual fitting of fuel supply units with modified fuel level senders. -G-.
Removing (old version):
–
Remove fuel delivery unit
→ Chapter
.
–
Release the connectors
-arrows-
and detach the electrical cables
-1, 2 and 3-
.
–
Lever off retaining lugs
-4-
and
-5-
using a screwdriver and remove the Fuel gauge sender -G- by pulling downwards
-arrow-
.
Fitting
–
Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–
Insert connectors and check they have engaged properly.
–
Install fuel delivery unit
→ Anchor
.
Removing (new version):
–
Remove fuel delivery unit
→ Chapter
.
–
Push the fuel level sender -G- slightly inwards in the
-direction of the arrow-
and at the same time remove upwards in the
-direction of the arrow-
.
–
Unlock the connector tabs
-1 … 3-
, inserting a fine screwdriver through the holes
-arrows-
and disconnect the connectors.
Install:
Install in reverse order to dismantling, noting the following:
Fitting position for fuel level indicator sender -G- cables
I -
Brown Cable
II -
Blue Cable
III -
Black Cable
Note
When mounting the fuel level sender -G- on the supply unit, make sure that the cables are correctly positioned.
–
Insert the fuel gauge sender -G- into the guides on fuel delivery unit and press upwards until it clicks into place.
–
Install fuel delivery unit
→ Chapter
.
Power unit
4 cylinder Gasoline direct injection engine, 2.0 liter turbo 4V, mechanics
Fuel supply, gas operation
Repairing the fuel supply system
Fuel level gauge sender G : removing and fitting
Checking fuel pump >
< Removing and installing fuel delivery unit