seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

Measure radial play for crankshaft > < Crankshaft dimensions
Measure axial play of crankshaft
Measure axial play of crankshaft
Check the tool and equipment equivalence table according to the applicability between Seat / VW / Audi / Skoda → Chapter
Special tools and workshop equipment required
   
t  Adjustment tool -VW 387-, please see Correspondence → Anchor
  W00-0037
t  Gauge -VAS 6079-, see equivalent → Anchor
  W00-1261
Operation process
–  Bolt the gauge -VAS 6079- to the cylinder block using the Adjustment tool -VW 387- and apply it against the side of the crankshaft.
–  Push the crankshaft by hand against the gauge and adjust this to „0“.
–  Remove the crankshaft from the gauge and read the value obtained.
Axial clearance:
l  new: 0,07 ... 0.23 mm
l  Wear limit: 0.30 mm.
  A13-0468

Measure radial play for crankshaft > < Crankshaft dimensions