seat Workshop Repair Guides

SEAT Workshop Service and Repair Manuals

ABOUT US
Sealing flange: Assembly overview > < Bracket for auxiliary units: Removing and installing

Leon Mk2

Vibration damper: Removing and installing
Vibration damper: Removing and installing
t  Removing → Anchor
t  Installing → Anchor
Removing
l  Poly-V belt is removed → Chapter
   
–  Unscrew the securing bolts -arrows- and remove the engine soundproofing..
  N10-10175
–  Fit the right noise insulation -fastening parts 1 ... 3-.
  A10-1643
–  Remove vibration damper/belt pulley.
  Note
To loosen and tighten the crankshaft pulley, lock with ring spanner on centre bolt.
Installing
Installation is carried out in the reverse sequence; note the following:
  N15-10315
–  Install the crankshaft pulley with genuine bolts only → Spare parts catalogue
t  Can only be fitted in one position: The borehole -arrow- in the crankshaft pulley should be placed on the protrusion for the notched belt.
  A13-0134

Sealing flange: Assembly overview > < Bracket for auxiliary units: Removing and installing